SFF-8643 to U2 Kit NGFF M-Key to HD Mini SAS NVME PCIe SSD SATA Adapter for Mainboard

This adapter card simply combines SATA to NGFF and PCIe to NVMe SSDs onto one card, allowing the two SSDs to be used independently.

Supports M.2 modules in format 22110 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA or PCIe

Hyper Kit Storage controller,Ultra PCI-E Card (PCIe 3.0 x4),The card only work for PCI-E SSD.(Not work for SAS or HD Mini SAS HD)

This U.2 M.2 converter enables two different usage applications.

1. One M.2 PCIe SSD in 22110, 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SFF-8643 HD Mini interface.

2. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SATA 22pin interface.

U.2 U2 SFF-8639 68Pin Connector NVME PCIe4.0 PCI-E5.0 SSD Cable Male to Female Socket Extension

Length:50cm

1) The High Speed system referenced as PCI-E 4.0 standard, meets the 64Gbps specification.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) Hyper Kit Storage controller cable,Ultra M.2 Card cable for Mainboard SSD 750 M.2 and PCI-E 4x;Support PCIe 5.0/4.0/3.0 x4.

3) This cable can be used to connect internal devices, e.g. a device with SFF-8639 Male to Female extension cable connector.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) The Cable only support PCI-E, not support SAS raid card. (Cable only, the adapter / card not included.)

U.2 U2 SFF-8639 NVME PCIe SSD Cable for Mainboard SSD 750 p3600 p3700 M.2 SFF-8643 Mini SAS HD

1) The High Speed system referenced as PCI-E 4.0 standard, meets the 64Gbps specification.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

2) Hyper Kit Storage controller cable,Ultra M.2 Card cable for Mainboard SSD 750 M.2 and PCI-E 4x;Support PCIe 5.0/4.0/3.0 x4.

3) This cable can be used to connect internal devices, e.g. a device with SFF-8639 connector to a controller with SFF-8643 4i connector.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) The Cable only support PCI-E, not support SAS raid card. (Cable only, the adapter / card not included.)

M.2 SFF-8643 Card and U.2 U2 SFF-8639 NVME PCIe SSD Cable for Mainboard SSD

The package included one adapter and one 50cm cable.

for Mainboard and U.2 SSD 750 M.2 SFF-8643 interface.

Not work for SAS or SATA disk.

Hyper Kit Storage controller,Ultra M.2 Card

Support 4x PCIe 3.0 and PCIe 4.0

Support Windows 10 or Later.

NGFF M-Key 22x80mm to Vertical SFF-8643 Socket PCI-E U.2 Kit SFF-8639 NVME PCIe4.0 SSD Adapter for SSD750 p3600 p3700 M.2

1) Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.for Mainboard SSD 750 M.2 SFF-8643 Mini SAS HD,Hyper Kit Storage controller,Ultra M.2 Card,4 GBps PCIe 4.0 x4.

2) Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF M-key socket.Ultra M.2 Card only. (The cable not include.)

3) This convertor expands the system by one SFF-8643 interface. It can be connected e.g. one SSD by using an optional cable.The card transmits PCI Express signals using the NVMe protocol.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

NGFF M-Key 22x80mm to Vertical SFF-8643 Socket PCI-E U.2 Kit SFF-8639 NVME PCIe4.0 SSD Adapter for SSD750 p3600 p3700 M.2

1) Industry standards: Support for SAS 3.0/4.0, PCIe Gen 3/4 means that you can trust that your equipment will perform at optimal levels without any signal loss or degradation.for Mainboard SSD 750 M.2 SFF-8643 Mini SAS HD,Hyper Kit Storage controller,Ultra M.2 Card,4 GBps PCIe 4.0 x4.

2) Support the 22*30 mm/22*42 mm/22*60 mm/22*80 mm size of M.2 NGFF M-key socket.Ultra M.2 Card only. (The cable not include.)

3) This convertor expands the system by one SFF-8643 interface. It can be connected e.g. one SSD by using an optional cable.The card transmits PCI Express signals using the NVMe protocol.

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Ultra-thin PCBA body, with its flat and foldable design ensures efficient data transmission. High quality PCB boards with high frequency, low resistance material, high TG board, and gold plated fingers ensure excellent electrical conductivity while reducing the risk of collapse or blue screen due to oxidation.

PCI-Express 4.0 Mini SAS HD SFF-8643 Female to SFF-8643 Female PCBA Coupler Adapter Extender

It is an internal Mini Serial Attached SCSI HD x4 (SFF-8643) to SFF-8643 adapter. It can connect two SFF-8643 connector together.

The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS4.0 standard, meets the 24Gb/s SAS specification.

These HD Connectors will be used on the SAS4.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 24Gb/s.

Smaller size connector and cable saves device space, Applications for Servers,Data Storage,Workstation,Meet PCIe Gen3/4 and SAS4.0 specification.

Provide four channels signal transmission as per industry standard,Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel.

SFF-8643 PCI-E 4.0 Female to U.2 SFF-8639 U.3 NVME PCIe PCI-Express SSD Adapter for Mainboard

This convertor expands the SFF-8639 U.2 U.3 by one SFF-8643 interface. It can be connected e.g. one SSD by using an optional cable.

The card transmits PCI Express 4.0/5.0 signals using the NVMe protocol.

Connectors: 1 x SFF-8643 female and 1 x SFF-8639 U.2 U.3 female and 1 x SATA power.

Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2.

The vertical connector allowing you to connect it to a female port, even if space around the port is limited.

The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.

U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.

Internal Mini SAS SFF-8643 Host to 4 SAS 29Pin SFF-8482 Target Disk 6Gbps Data Server Raid Cable

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

HD Mini-SAS cable configurations,The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

internal HD Mini-SAS Copper Cables

Internal Mini SAS SFF-8643 to to 4 SAS 29PIN hard disk data Cable

This SAS cable enables you to connect up to 4 SAS or SATA drives to a Mini SAS HD SFF-8643 controller.

Not work for PCI-E SFF-8643 controller.


Connector:

Host: 1 x Mini SAS HD SFF-8643

Device: 4 x SAS 29pin

Internal Mini SAS HD SFF-8643 to Mini SAS High Density HD SFF-8643 Data Server Disk Raid Cable 50cm

It is an internal Mini Serial Attached SCSI HD x4 (SFF-8643) to SFF-8643 cable.

It is used for connecting a SAS/SATA adapter to a SAS/SATA backplane.

The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

These HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

Length: 50cm

22X80mm 2280 M.2 SFF-8643 Card and U.2 U2 SFF-8639 NVME PCIe SSD Cable PCI-E 3.0 4.0 for Mainboard SSD

The package included one adapter and one 50cm cable.

for Mainboard and U.2 SSD 750 M.2 SFF-8643 interface.

Not work for SAS or SATA disk.

Hyper Kit Storage controller,Ultra M.2 Card 22x80mm 2280 full size type.

Support 4x PCIe 3.0 and PCIe 4.0

Support Windows 10 or Later.

HD Mini-SAS cable configurations

It is an external Mini Serial Attached SCSI HD x4 (SFF-8644) to Mini Serial Attached SCSI x4 (SFF-8088) cable

The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

External HD Mini-SAS Copper Cables

Length: 50cm

Notice:

There are SFF-8643 port for belowing raid card:

LSI 9207-8i
Adaptec Raid 71605
Adaptec Raid 72405
Adaptec Raid 8885Q
Adaptec Raid 8885
Adaptec Raid 8805
Adaptec Raid 8885E
Adaptec Raid 71685
Adaptec Raid 7805
Adaptec Raid 71605E
Adaptec Raid 78165
Adaptec Raid 81605ZQ


There are SFF-8644 port for belowing raid card:

LSISAS9202-16e
Adaptec Raid 71685
Adaptec Raid 8885Q
Adaptec Raid 8885
Adaptec Raid 8885E
Adaptec Raid 78165

HD Mini-SAS cable configurations

It is an internal Mini Serial Attached SCSI HD x4 (SFF-8643) to Mini Serial Attached SCSI x4 (SFF-8087) cable.

It is used for connecting a SAS/SATA adapter to a SAS/SATA backplane.

The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

internal HD Mini-SAS Copper Cables

Internal Mini SAS SFF-8087 to mini sas High Density HD SFF-8643 data Cable

Length: 50cm

Notice:

There are SFF-8643 port for belowing raid card:

LSI 9207-8i
Adaptec Raid 71605
Adaptec Raid 72405
Adaptec Raid 8885Q
Adaptec Raid 8885
Adaptec Raid 8805
Adaptec Raid 8885E
Adaptec Raid 71685
Adaptec Raid 7805
Adaptec Raid 71605E
Adaptec Raid 78165
Adaptec Raid 81605ZQ


There are SFF-8644 port for belowing raid card:

LSISAS9202-16e
Adaptec Raid 71685
Adaptec Raid 8885Q
Adaptec Raid 8885
Adaptec Raid 8885E
Adaptec Raid 78165

External Mini SAS HD SFF-8644 to Mini SAS High Density HD SFF-8644 Data Server Raid Cable 50cm 12Gbps

It is an external Mini Serial Attached SCSI HD x4 (SFF-8644) to SFF-8644 cable

The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

External HD Mini-SAS Copper Cables

Length: 50cm

PCI-E 3.0 4.0 to SFF-8643 Card Adapter and U.2 U2 SFF-8639 NVME PCIe SSD Cable for Mainboard SSD

The package included one card and one 50cm cable.

for Mainboard and U.2 SSD 750 PCI-E SFF-8643 interface

Not work for SAS or SATA disk.

Hyper Kit Storage controller,Ultra PCI-E Card

Support 4x PCIe 3.0 and PCIe 4.0

Support Windows 10 or Later.

Internal Mini SAS SFF-8643 Host to 4 SATA Target Hard Disk 6Gbps Data Server Raid Cable

HD Mini-SAS cable configurations

The High Density (HD) system referenced as HD Mini-SAS (SFF-8643) in the SAS 2.1 standard, meets the 6Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the

connectors will be the next generation of SAS to run at 12Gb/s.

internal HD Mini-SAS Copper Cables

Internal Mini SAS SFF-8643 to to 4 SATA 7pin hard disk data Cable

This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS HD SFF-8643 controller.


Connector:

Host: 1 x Mini SAS HD SFF-8643

Device: 4 x SATA 7 pin

6 Gb/s Serial Attached SCSI (SAS) specification

Data transfer rate up to 6 Gb/s

Cable for internal connection Cable length: ca. 0.5m

Dual Ports Mini SAS HD SFF-8644 To Internal SAS HD SFF-8643 PCBA Female Adapter With Low Profile Bracket

2-Ports SFF-8643 to SFF-8644 Adapter with Full PCI Slot Profile Mounting Bracket;

External 8644 to internal 8643 adapter, will work both on the host and device side.

Supports External SFF-8644 Host Connectors.

Supports Internal SFF-8643 Device Connectors

Supports up to 12Gb/s Mini SAS HD Data Transfer Rate

With Lowe Profile and Standard Profile bracket.

The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification.

These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

PCI-E 1X to U.2 U2 Kit SFF-8639 NVME PCIe SSD Adapter for Mainboard SSD 750 p3600 p3700 M.2 SFF-8643

for Mainboard Intel SSD 750 M.2 SFF-8643 Mini SAS HD

Hyper Kit Storage controller

Ultra PCI-E Card (PCIe 3.0 x4)

The card only work for PCI-E SSD.(Not work for SAS or Mini SAS HD)

Package included the PCI-E card+Low profile bracket.