SFF-8482 SAS Cable 29Pin Male to Female Extension Cable for SAS Hard Disk Drive SSD 12Gbps.

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive; SAS 29 pin straight SFF-8482; Male to Female cable.

30cm 50cm or 100cm cable and UL2725 26AWG SATA Cable PVC jacket.

One very common use of the SFF-8482 connector is in SAS backplanes. The male portion of the connector can be either SAS or SATA power and 7-pin data connectors.

While one can plug a SATA drive in the SAS SFF-8482 connector, one cannot plug a SAS drive into the SATA variant due to a piece of plastic bisecting the 7-pin data connector and SATA power connector.

SFF-8639 NVME U.2 to NGFF M.2 M-key PCIe SSD Adapter for Mainboard Replace SSD 750 p3600 p3700

With Black Case Enclosure

1) Need M-key or NVME SSD, the B-key or B/M-key SSD cannot work; Connector: U.2 SFF-8639 male 67 pin M.2 NGFF key M slot.

2) This converter enables the connection of a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. The converter can be installed into your system internally through the U.2 68 pin interface.

3) A U.2 SSD is a high-performance data storage device designed to support the Peripheral Component Interconnect Express (PCIe) interface using a small form factor (SFF) connector that is also compatible with standard SAS and SATA-based spinning disks and solid-state drives (SSDs).

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Compliant with PCI Express 4.0. No driver installation is required. Most of the latest operating systems support PCIe SSDs.


System requirements :

1. Windows 8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.16

2. A free U.2 SFF-8639 interface or A free SFF-8643 interface

3. It does not work for SATA port.

U.2 U2 SFF-8639 NVME PCIe SSD Adapter Male to Female Extension 68pin PCI Express PCBA

1) The adapter enables the extension of a U.2 connection;U.2 SFF-8639 68pin male to female.

2) The SFF-8639 is solid state mechanical hard disk for 2.5inch storage with PCI-E singnals.U.2 U2 SFF-8639 NVME PCIe SSD Adapter Male to Female Extension 68pin PCI Express PCBA

3) A U.2 SSD is a high-performance data storage device designed to support the Peripheral Component Interconnect Express (PCIe) interface using a small form factor (SFF) connector that is also compatible with standard SAS and SATA-based spinning disks and solid-state drives (SSDs).

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.

5) Compliant with PCI Express 4.0. No driver installation is required. Most of the latest operating systems support PCIe SSDs.

SFF-8639 NVME U.2 to Combo NGFF M.2 M-key SATA PCIe SSD Adapter for Mainboard Compatible with SSD 750 p3600 p3700

This U.2 M.2 converter enables two different usage applications.

1) One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the U.2 68 pin interface.

2) One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5inch HDD. The converter can be installed into the system internally through the SATA Express interface.

3) A U.2 SSD is a high-performance data storage device designed to support the Peripheral Component Interconnect Express (PCIe) interface using a small form factor (SFF) connector that is also compatible with standard SAS and SATA-based spinning disks and solid-state drives (SSDs).

4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging. application of double-sided assembled modules supported,System requirements :Windows 10, Linux Kernel 3.16 and A free U.2 SFF-8639 interface

5) Compliant with PCI Express 4.0. No driver installation is required. Most of the latest operating systems support PCIe SSDs. The converter can be installed into your system internally through the U.2 68 pin interface.

6) Connector: U.2 SFF-8639 male Dual 67 pin M.2 NGFF slot.

7) Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA or PCIe

SFF-8482 SAS 29Pin to USB Type-C & Type-A 5Gbps Hard Disk Drive Raid Adapter with Chipset and Power Port (Need 12V/3A Power Supply)

The card need 12V/3A DC5.5*2.1mm plug Power Supply, The power supply not include in the package, You need to buy it separately if you have not it.

This adapter has built-in chip, Can convert SAS disk to the USB interface of the common motherboard, so USB computers can also use the SAS disk and no need any SAS raid card.

if your USB interface without SAS function, Connect our adapter, it can directly read/write SAS hard disk, support win7, win10, win11, lunix operating system.

After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing.

Supports transmission rates of SAS/SATA 6.0Gbps, 3.0Gbps, 1.5Gbps.

Offers a throughput of up to 5Gbps when used with a USB 3.0 or Type-C host and device,an 10x the capability of USB 2.0.

Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.

Package include:

1 x SAS to USB adapter

1 x Type-C Host to USB-A Target Cable

1 xType-A to USB-A Cable

1 x DC12V Power Supply

SFF-8482 SAS 29Pin to USB Hard Disk Drive Raid Adapter with Chipset and Power Port (Need 12V/3A Power Supply)

The card need 12V/3A DC5.5*2.1mm plug Power Supply, The power supply not include in the package, You need to buy it separately if you have not it.

This adapter has built-in chip, Can convert SAS disk to the USB interface of the common motherboard, so USB computers can also use the SAS disk and no need any SAS raid card.

if your USB interface without SAS function, Connect our adapter, it can directly read/write SAS hard disk, support win7, win10, win11, lunix operating system.

After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing.

Supports transmission rates of SAS/SATA 6.0Gbps, 3.0Gbps, 1.5Gbps.

Offers a throughput of up to 5Gbps when used with a USB 3.0 host and device,an 10x the capability of USB 2.0.

Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.

SFF-8482 SAS 29Pin to 7+15 22Pin SATA Hard Disk Drive Raid Adapter with Chipset and Power Port

This adapter has built-in chip, Can convert SAS disk to the SATA interface of the common motherboard, so SATA computers can also use the SAS disk and no need any SAS raid card.

if your SATA interface without SAS function, Connect our adapter, it can directly read/write SAS hard disk, support win7, win10, win11, lunix operating system.

It is not recommended to connect the USB disk enclosure or cable, The USB master chipset is not adapted, incompatibility may occur.

After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing.

Supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.

Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.

SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter with 15 Pin Power Port

Right Angled 90 Degree Adapter

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Note:

1. It can connect the SATA hard disk to SATA motherboard.

2. It can connect the SAS hard disk to SAS motherboard.

3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.)

4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.)

This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).

7 Pin SATA Connector to 15 Pin Male Power Connector and SFF-8482 SAS Connector.

Connector Details: 1 x 7 Pin Serial ATA Male.

Connector Details: 1 x 15Pin Male.

Connector Details: 1 x 22 Pin SAS.

Package:

1 x Adapter

SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter with 15 Pin Power Port

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Note:

1. It can connect the SATA hard disk to SATA motherboard.

2. It can connect the SAS hard disk to SAS motherboard.

3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipset, Otherwise can't work.)

4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipset, Otherwise can't work.)

This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).

7 Pin SATA Connector to 15 Pin Male Power Connector and SFF-8482 SAS Connector.

Connector Details: 1 x 7 Pin Serial ATA Male.

Connector Details: 1 x 15Pin Male.

Connector Details: 1 x 22 Pin SAS.

Package:

1 x Adapter

SFF-8482 SAS 29 Pin to 7 Pin SATA Hard Disk Drive Raid Cable with 15 Pin SATA Power Port

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Note:

1. It can connect the SATA hard disk to SATA motherboard.

2. It can connect the SAS hard disk to SAS motherboard.

3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.)

4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.)

This SAS cable to 1x SATA with 50 cm length, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).

7 Pin SATA Connector to 15 Pin Male Power Connector and 29 Pin SAS Connector.

Connector Details: 1 x 7 Pin Serial ATA Male.

Connector Details: 1 x 15Pin Male.

Connector Details: 1 x 29 Pin SAS.

Length: 50cm(approx).

SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Drive Raid Extension Cable with 15 Pin SATA Power Port

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.

The SFF-8482 is a 29-pin connector with a plastic body, and configured with 15 pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals.

The SFF-8482 supports 2 SAS ports (lanes) to/from the drive.

Note:

1. It can connect the SATA hard disk to SATA motherboard.

2. It can connect the SAS hard disk to SAS motherboard.

3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.)

4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.)

This SAS cable to 1x SATA22pin with 10 cm length, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).

7 Pin SATA Connector to 15 Pin Male Power Connector and 29 Pin SAS Connector.

Connector Details: 1 x 22 Pin Serial ATA Male.

Connector Details: 1 x 29 Pin SAS.

Length: 10cm(approx).