The 24-pin master connector that delivers 3.3V, 5V, 12V and -12 V from the PSU to the mainboard. ATX 24-pin mainboard power connector The ATX 24-pin connector is the master power feed from the PSU to the mainboard. Today every desktop and many server mainboards use the same connector.

24 Pin motherboard power extension cable features one male and one female 24 Pin ATX connector, extending the length of your ATX power supply connection.Plug and play, convenient and fast. Safety buckle on the plug to prevent accidental fall off.

This 24-pin ATX extension cable extends the power connector from a ATX power supply to a motherboard power connection to provide strain relief on the connections of your computer case components.Each cable is individually protected by flexible nylon sleeve.

It is 1ft (30cm) in length, giving you enough space within the computer case.Use18AWG Tin-plated copper wire, strong conductivity, corrosion and oxidation resistance.

Motherboard extension cable has removable cable ties for dressing the cable and a clip and latch for a secure connection to prevent accidental disconnections. 24Pin male and female connector cannot be disassembled.

This XT60 Extension Connector Cable use 12AWG Tined Copper Wire with PVC nylon material.Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT60 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT60 is a connector type for high-current lithium polymer batteries that can handle up to 30A and 300V.

XT60 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT60 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

This XT60 Extension Connector Cable use 12AWG Tined Copper Wire with PVC nylon material.Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT60 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT60 is a connector type for high-current lithium polymer batteries that can handle up to 30A and 300V.

XT60 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT60 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

This XT60 Extension Connector Cable use 12AWG Tined Copper Wire with PVC nylon material.Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT60 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT60 is a connector type for high-current lithium polymer batteries that can handle up to 30A and 300V.

XT60 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT60 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

Cord in SPT-2 18AWG x 2C,Made of high-quality materials, durable, environmentally friendly, flame-retardant and fire-resistant.

The Cable easily compatible for connecting and disconnecting of most device are applied in computer, laptop, HDTV, charger, speaker.With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

This male-to-female extension cable allowing you to safely and effectively extend your power connection. Enjoy the convenience of technology with the assurance of safety and reliability.

The Copper conductor for safty and durability,Extend powered devices away from wall outlets,Durable, heavy-duty construction short USA AC 2-pin power extension cable.

The female connector plugs directly into the device power cable while the male connector plugs into a standard outlet.

Wire Gauge:2X0.824MM²(18AWG) Power Cable is Rated for 10A Amps and Up to 125 Volts to Support Common Voltage Power Requirements in the home or office. Rated up to 10A AC 125V AC or 2.5A AC 250V.

It can be used as an extension for device. Very useful when you need to connect multiple power adaptors into a small UPS or power strip and because of their shape they collide or block the access to other outlets.

USA Outlet Saver Power Extension Cord Cable 2-prong 2 Outlets for NEMA 1-15P to NEMA 1-15R, NOTE: Female end is polarized but male end is not !

This XT90 Extension Connector Cable use 10AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT90 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT90 is a connector type for high-current lithium polymer batteries that can handle up to 40A and 300V.

XT90 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT90 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT90 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT90 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

This XT90 Extension Connector Cable use 10AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT90 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT90 is a connector type for high-current lithium polymer batteries that can handle up to 40A and 300V.

XT90 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT90 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT90 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT90 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

This XT90 Extension Connector Cable use 10AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT90 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT90 is a connector type for high-current lithium polymer batteries that can handle up to 40A and 300V.

XT90 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT90 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT90 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT90 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

This XT30 Extension Connector Cable use 18AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT30 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT30 is a connector type for high-current lithium polymer batteries that can handle up to 10A and 300V.

XT30 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT30 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT30 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT30 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

This XT30 Extension Connector Cable use 18AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT30 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT30 is a connector type for high-current lithium polymer batteries that can handle up to 10A and 300V.

XT30 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT30 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT30 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT30 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

This XT30 Extension Connector Cable use 18AWG Tined Copper Wire with PVC nylon material; Length 50cm.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

XT30 connectors fit most solar panels and battery packs, solar panels and power stations can be easily connected. XT30 is a connector type for high-current lithium polymer batteries that can handle up to 10A and 300V.

XT30 Extension Cable easily compatible for connecting and disconnecting of most battery packs are applied in portable power station, remote control toy cars, UAV,RC battery.

XT30 connector use gold plated plug, corrosion resistance, plug-in resistance, provide maximum conductivity and durability, to ensure stable current transmission.

The XT30 connector is a popular connector in RC and UAV applications. This plug/connector provides low resistance and is commonly used to connect an ESC to a battery. The XT30 Connector features a yellow polyamide body, which ensures durability and visibility in complex setups.

USA 2pin Male to 90 Degree Right Angled IEC60320 C7 Power Supply Cord cable 100cm

The cable is Angled Design,The angled type Allowing you to connect it to a female port, even if space around the port is limited.

Length 1.0m,Cord in SPT-2 18AWG x 2C,Made of high-quality materials, durable, environmentally friendly, flame-retardant and fire-resistant.

Rated up to 10A AC 125V AC or 2.5A AC 250V.

The Cable easily compatible for connecting and disconnecting of most device are applied in computer, laptop, HDTV, charger, speaker.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

C7 Power Connector is a computer cord used to power a PC or monitor. It’s the typical PC power cord you’ll find attached to the back of your computer or monitor.

You can also find these cords at the end of most desktop power supplies. They have two, as opposed to three, prongs (or pins) on either end of the cord and are often called kettle cords, figure 8 cords, or IEC C7 power cords.

The C7 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts.

Figure 8 IEC 320 C7-C8 90 Degree Up Down Angled Right Angle AC Power Adapter.

Male to Female Extension Adapter; 90 degree angled type.

The adapters are Angled Design,The angled type Allowing you to connect it to a female port, even if space around the port is limited.

Rated current: 2.5 (A);Rated voltage: 110-250 (V);Shell Material: Nylon.

Peripherals: printer,Disk,Scanner, FAX,Decoder,Camera,Piano,PLC,AIO, and any peripheral using an C7/C8 Type connector.

C7/C8 Power Connector is a computer cord used to power a PC or monitor. It’s the typical PC power cord you’ll find attached to the back of your computer or monitor.

You can also find these cords at the end of most desktop power supplies. They have two, as opposed to three, prongs (or pins) on either end of the cord and are often called kettle cords, figure 8 cords, or IEC C7/C8 power cords.

The C7/C8 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts.

Cord in SPT-2 18AWG x 2C,Made of high-quality materials, durable, environmentally friendly, flame-retardant and fire-resistant.

Cord IEC60320 C8 Plug to C7 Receptacle Male to Female Extension Supply Main Adapter Cable 30cm.

Rated up to 10A AC 125V AC or 2.5A AC 250V.

The Cable easily compatible for connecting and disconnecting of most device are applied in computer, laptop, HDTV, charger, speaker.

With low resistance, antioxidant, anti-corrosion and good electrical conductivity, providing stable current for your device.

C7/C8 Power Connector is a computer cord used to power a PC or monitor. It’s the typical PC power cord you’ll find attached to the back of your computer or monitor.

You can also find these cords at the end of most desktop power supplies. They have two, as opposed to three, prongs (or pins) on either end of the cord and are often called kettle cords, figure 8 cords, or IEC C7/C8 power cords.

The C7/C8 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts.

Single C14 to Dual 5-13R Short Power Y Type Splitter Adapter Cable Cord,

It supports a maximum current of 10A and is compatible with a voltage of 250V, ensuring efficient power transfer for various electronic devices.

The plug type for this cable is IEC 320 C14 to C13, featuring AC Converter design with an IEC 3-Pole Male to Dual Female Configuration.

You'll want to check your device to see which way the cable would exit when plugged in.

Offering versatile compatibility, it is suitable for a wide range of electronic equipment that requires an IEC 320 C14 to C13 connection, making it a flexible solution for various setups.

C13 Power Cord is a computer cord used to power a PC or monitor. It’s the typical PC power cord you’ll find attached to the back of your computer or monitor. You can also find these cords at the end of most desktop power supplies. They have three, as opposed to two, prongs (or pins) on either end of the cord and are often called kettle cords, figure 8 cords, or IEC C13 power cords.

The C14 power cord is an international standard for the connector end of a power cord. The connector has three round prongs with a larger ground pin than the other two. The pin arrangement of a C14 plug is identical to that of a C13 power cord. Therefore, the C14 plug will fit into a C13 socket and vice versa, but they are not interchangeable on every device.
The C13 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts. In contrast, the C14 connector is intended for use with devices that run on 230 volts. This means that the C14 connector is rated for up to 15 amps at 250 volts.

IEC Male C14 to Up Right Angled 90 Degree IEC Female C13 Power Extension Adapter

An angled power connector. The plug type for this adapter is IEC 320 C14 to C13, featuring a 90-Degree Angle AC Converter design with an IEC 3-Pole Male to Female 90-Degree Angle Configuration.

You'll want to check your device to see which way the cable would exit when plugged in.

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

It supports a maximum current of 10A and is compatible with a voltage of 250V, ensuring efficient power transfer for various electronic devices.

Offering versatile compatibility, it is suitable for a wide range of electronic equipment that requires an IEC 320 C14 to C13 connection, making it a flexible solution for various setups.

C13 Power Connector is a computer Connector used to power a PC or monitor. It’s the typical PC power Connector you’ll find attached to the back of your computer or monitor. You can also find these Connectors at the end of most desktop power supplies. They have three, as opposed to two, prongs (or pins) on either end of the Connector and are often called kettle Connectors, “figure 8” Connectors, or IEC C13 power Connectors.

The C14 power Connector is an international standard for the connector end of a power Connector. The connector has three round prongs with a larger ground pin than the other two. The pin arrangement of a C14 plug is identical to that of a C13 power Connector. Therefore, the C14 plug will fit into a C13 socket and vice versa, but they are not interchangeable on every device.

The C13 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts. In contrast, the C14 connector is intended for use with devices that run on 230 volts. This means that the C14 connector is rated for up to 15 amps at 250 volts.

IEC Male C14 to Right Angled 90 Degree IEC Female C13 Power Extension Adapter

An angled power connector. The plug type for this adapter is IEC 320 C14 to C13, featuring a 90-Degree Angle AC Converter design with an IEC 3-Pole Male to Female 90-Degree Angle Configuration.

You'll want to check your device to see which way the cable would exit when plugged in.

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

It supports a maximum current of 10A and is compatible with a voltage of 250V, ensuring efficient power transfer for various electronic devices.

Offering versatile compatibility, it is suitable for a wide range of electronic equipment that requires an IEC 320 C14 to C13 connection, making it a flexible solution for various setups.

C13 Power Connector is a computer Connector used to power a PC or monitor. It’s the typical PC power Connector you’ll find attached to the back of your computer or monitor. You can also find these Connectors at the end of most desktop power supplies. They have three, as opposed to two, prongs (or pins) on either end of the Connector and are often called kettle Connectors, “figure 8” Connectors, or IEC C13 power Connectors.

The C14 power Connector is an international standard for the connector end of a power Connector. The connector has three round prongs with a larger ground pin than the other two. The pin arrangement of a C14 plug is identical to that of a C13 power Connector. Therefore, the C14 plug will fit into a C13 socket and vice versa, but they are not interchangeable on every device.

The C13 connector is rated for up to 10 amps at 250 volts and is designed for use with appliances that run on either 120 or 240 volts. In contrast, the C14 connector is intended for use with devices that run on 230 volts. This means that the C14 connector is rated for up to 15 amps at 250 volts.

12VHPWR ATX3.0 PCI-E 5.0 Power Cable to Dual ATX 8Pin for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

16AWG Cable Length: 30cm

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Male to Female Adapter Extension Up Angled 90 Degree for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

Our 12VHPWR 90 Degree Adapter increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Male to Female Adapter Extension Down Angled 90 Degree for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

Our 12VHPWR 90 Degree Adapter increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular to Three ATX 8P Adapter for 4080 5090TI 16Pin 12+4P Graphics Card Up Angled 90 Degree

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

Our 12VHPWR to 3xATX8P 90 Degree Adapter increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular to Three ATX 8P Adapter for 4080 5090TI 16Pin 12+4P Graphics Card Down Angled 90 Degree

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

Our 12VHPWR to 3xATX8P 90 Degree Adapter increases more space between your GPU and your side panel. This enables installation of super wide cards in more narrow chassis.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Adapter Male to Female Angled 360 Degree for 4080 5090TI 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Adapter Male to Female Angled 360 Degree for 4080 5090TI 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Adapter to Four ATX 8P Up Angled 90 Degree for 4080 5090TI 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Adapter to Four ATX 8P Down Angled 90 Degree for 4080 5090TI 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Cable Male to Female Down Angled 90 Degree Extension for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

16AWG Cable ,Length: 17cm

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Cable Male to Female Up Angled 90 Degree Extension for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

16AWG Cable ,Length: 17cm

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Cable Male to Female Extension for 3080 3090TI PSU 16Pin 12+4P Graphics Card

The new standard formally introduces PCIe 5.0 graphics card support with a new 12-pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

16AWG Cable ,Length: 17cm

DC 7.9x5.4mm 65W 20V 15V-24V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Input: DC 7.9x5.4mm Jack, 65W Charger and support 15v-24v output.

Output: Surface Magnetic Connector male, DC 15v

Use it with DC Charger to conveniently charge your surface with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

DC 5.5X2.5mm Jack 65W 20V 15V-24V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Input: DC 5.5X2.5mm Jack, 65W Charger and support 15v-24v output.

Output: Surface Magnetic Connector male, DC 15v

Use it with DC Charger to conveniently charge your surface with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

DC 5.5X2.1mm Jack 65W 20V 15V-24V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Input: DC 5.5X2.1mm Jack, 65W Charger and support 15v-24v output.

Output: Surface Magnetic Connector male, DC 15v

Use it with DC Charger to conveniently charge your surface with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

DC 4.5X3.0mm 65W 20V 15V-24V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Input:DC 4.5X3.0mm Jack, 65W Charger and support 15v-24v output.

Output: Surface Magnetic Connector male, DC 15v

Use it with DC Charger to conveniently charge your surface with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

DC 7.4x5.0mm 65W 20V 15V-24V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Input: DC 7.4x5.0mm Jack, 65W Charger and support 15v-24v output.

Output: Surface Magnetic Connector male, DC 15v

Use it with DC Charger to conveniently charge your surface with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

Type-C USB-C Female 65W DC 15V to Surface Pro3 Pro4 Pro5 Pro6 Pro7 Pro8 Pro9 Book Pro Charge Cable

Build-in the PD Emulator Trigger at Type-C female end.

Input: Type-C female, 65W Type-C Charger and support 15v-24v output.

Output: Surface Laptop male, DC 15v

Use it with 65W Type-C Charger to conveniently charge your Laptop with DC 15v port.

Please note the Type-C charger power must support 15v-24v output. Otherwise it doesn't work.

Work for Surface Pro3/4/5/6/7/8/9,Surface Book1/2,Surface Go1/2/3 with Magnetic Connector.

12VHPWR ATX3.0 PCI-E 5.0 Power Modular Cable 16Pin to 16Pin for 3080 3090TI PSU 12+4Pin Graphics Card

The new standard formally introduces PCIe 5.0 graphics card support with a new 12+4pin 12VHPWR connector that can deliver up to 600W.

The new connector is set to debut with Nvidia RTX-40 and AMD RDNA 3 cards.

PCI-SIG 12VHPWR H+ , including 12 pin power supply terminal, and 4 pin signal terminal on the side,Capable of delivering up to 600W of power.

16AWG Cable Length: 30cm

DC Power 5.5 x 2.1mm / 2.5mm Male to 5.5 2.1/2.5mm Male Plug Cable

Right Angled 90 Degree Plug

Both connector are 5.5mm (outer)/2.5mm (inner) size

Also can work for 5.5/2.1mm socket

Length: 60cm

ATX Molex Micro Fit Connector 4Pin Male to Male Power Cable

Length: 60cm

20AWG UL1007 Cable

Connect your ATX power supply's 4-pin 12V connector.

PCI-E PCI Express ATX 6Pin Male to Dual 8Pin 6Pin Female Video Card Extension Power Cable

This PCI Express 6 pin to dual 8 pin power adapter cable lets you connect a standard 6-pin PCI Express power connection provided by the computer power supply to newer ATI and NVidia video cards that require an 8 pin power connection.

A cost-effective solution, the PCIe 6 pin to 8 pin power adapter eliminates the expense of upgrading a computer power supply for the sake of compatibility with a newer video card.

PCI Express Power 6 Pin male * 1

PCI Express Power 8 Pin Female * 2

12Pin to ATX Dual 8Pin 6Pin Female Extension Splitter GPU Power Cable for 3080 3090 Cirsair AX850 AX750 AX650

It convert dual 8pin 6pin power to 12pin power.

6+2-Pin connector also used for 8+8-Pin, 8+6-Pin and 6+6-Pin connectors

Length: 60cm

6 Hard Disk Control System Intelligent Control Management System HDD SSD Power SwitchBay

with 5.25 CD-ROM

6 way hard disk power switch management and control system

Advantages: safe and stable 6 way hard disk independent switch control and management system, lead-free high temperature SMT, durable.

Usage: System control 6 hard disks on and off, energy saving and environmental protection, prolong the hard disk life, ensure data security.