10pcs/lot Quick Connect Terminal Double Wire Plug Connector D2 Solderless Pluggable with Locking Buckle Compatible with Led Light Strip Connectors 2Pin 18-22AWG

10pcs/lot in the package; Quick Connect Cable Connector: Simply lift the handle, insert the wire, press down to close the handle, and tighten for a secure connection.

Versatile Application: 2 pin christmas light connector,Suitable for vehicles, audio/video equipment, speakers, LED strip installations, and other electrical devices. Widely used for low-voltage, solderless fine wires to achieve low-loss home wiring.

Friendly Operation: Low-voltage wire connectors cable connectors are easy to use: Open the handle, insert the stripped end into the slot, press to secure the wire, and finally snap the control lever shut to complete the connection.

Reusable and Efficient: Compatible with soft wires. Each connector features an independent anti-slip plate structure, enabling secure connections for wires of varying diameters.

Durable Construction : Led strip connectors Crafted from premium flexible plastic with crack-resistant properties. The dual-wire connector employs a plug-and-play design, eliminating the need for wire stripping and ensuring quick, hassle-free installation.

DIY Solder Type-C Female Socket Replace Micro-USB 5Pin for PS4 DualShock JDS-040 JDS-055 Repair Part Board Connector Module

The Type-C female connector is replaced for Micro USB 5Pin Female; For DIY OEM solder use.This adapter is a direct upgrade for Micro-USB models controller JDS-040, JDS-055.

You need to assembly the connector and modify the hole yourself. Proficiency in manual techniques is required.

Then The flexible ribbon cable (not included) allows for simple installation without soldering, getting your controller charging again in minutes.

Fast power and data,Offers a throughput of up to DC 5V when used with a Type-C USB2.0 power and device.

This USB-C charging port socket board is compatible with all PS4 JDS-040 JDS-055 controllers and their internal layout, ensuring a perfect replacement fit.

Package included one PCBA adapter, not include flat cable and screwdriver.

4pcs/lot Type-C Micro-USB DC 5.5x2.1mm 3.5X1.35mm Power Extension Cable for Backpack Charging Electric Heating Pads

4pcs different cable in the package for DIY OEM use. Type-C & Micro-USB & DC 5.5x2.1mm & DC 3.5*1.35mm; You need to solder the cable yourself.

Backpack-Mounting: A great solution to continuing your connection to your power device. Connect your male cable to the female Backpack mount to continue your power.

Fast power:Offers a throughput of up to DC 5V 3A when used with an USB2.0 power and device.

Peripherals: Connect Electric Heating Pads,mobile devices, Led Light, and any peripheral using these connectors.

Cable Length 10cm. This product is installed in the backpack inside, for connecting the charge treasure,It comes with power function, offers a convenient charging for your electronic devices.

USB 3.0 Type-A Female Socket Receptacle Connector Solder Type with Aluminum Alloy Shell for 6.0mm Cable

The package included Connector+Front Cover+Back Cover+Screw Nut.(The cable and screwdriver not include)

Solder type and you can solder the cable yourself. for Customization DIY OEM ODM application.

Fit for OD=6.0mm USB 3.0 Cable.

Compliant with USB 3.0 Super-Speed (5Gbps), USB 2.0 Hi-Speed (480Mbps), USB 1.1 Low-Speed (1.5Mbps).

The aluminum alloy shell can better protect the connector, so that the product has better performance.

SM-6E I/O Connector IEEE 1394 6Pin CN3 Socket 55100-0670 Female JZSP-CMP9-1-E Compatible with Yaskawa Panasonic Servo 54280-0609

Solder Wire Connector, Server 6 Pole Encoder female CN3, compatiable for servo Device Connection

Universal suitable for Yask-awa JZSP-CMP9-1, for Molex 55100-0670, for 3M 3E206-0100KV/3E306-3200-008, for Panaso-nic WSK-P06P-M, etc.

Connector: 6-pin female. Copper alloy Shell & PBT Insulator,Contact Copper alloy & Gold plating.

Convenient, designed for ease of use,Durable single-piece molded construction.Virtually indestructable.

1pc connector in the package.

Specification:

Rated current: 2A

Max Contact resistance: 30mΩ

Max Insulation resistance: 1000MΩ

Minimum Withstand voltage: 500V DV (1 minute)

Temperature range: -55℃ ~ +105℃

10pcs Micro USB 3.0 10pin Female Socket Receptacle Board Mount SMT Type with PCB

for USB Disk DIY OEM, Receptacle Board Mount SMT Type.

Adapts USB 3.0 Micro Type-B Female Connections to the other end and vice-versa, With this connector, you can DIY directly connect micro usb 3.0 socket, converted to other extension.

Very easy to use USB3.0 data cable connected to the Micro USB3.0.

Super-speed up to 5Gbps 10times faster than USB 2.0 Version,Support two-way data transmission at the same time.

Convenient, designed for ease of use,Durable single-piece molded construction.Virtually indestructable.

The USB 3.0 Micro-B consists of a standard Micro-B USB 5Pin, with an additional 5-pin place on the other side. That’s been done this way for USB 3.0 Micro-A host connectors to preserved compatibility with USB 1.x/2.0 Micro USB cables. There’s no way to connect a micro USB 3.0 cable into a micro USB 2.0 receptacle due to obvious mechanical differences.

10pcs in the package.

2pcs/set HDMI to Micro HDMI Type A to Type-D Male Connector Socket for Raspberry PI 3B/3B+/4B Opposite U Shape Back Angled

The angled type Allowing you to connect it to a female port, even if space around the port is limited.

The package only include 2pcs connector, HDMI-HDMI and HDMI to Micro-HDMI.

Please check the HDMI connector type and dimension first.

Typical application: connect your Raspberry PI with HDMI port to displays with standard HDMI input.

CYFPV FPC Ribbon Flat Cable 0.5mm Pitch 20pin for USB3.0 2.0 FPV Multicopter Aerial Photography

Note:

1. The package only include one cable, not any connector at both end.

2. You also can buy the connector based your requirement. please search "CYFPV" at our store to buy the other connector.

---------------------------------------------------------------------------------

Work for Multicopter Aerial Photography

Typical application: connect your video device with usb port to video device with standard usb input.

When the cable is too stiff, it may affect the gimbal performance especially for those light weight gimbals.

This cable is very soft ,specially oriented brushless gimbal application ,suit for cameras with usb port.

See belowing assembly diagram:

SKU: CN-020-FE

CYFPV Micro HDMI Type D Female Connector Socket for FPV HDTV Multicopter Aerial Photography

Note:

1. The package only include one connector, the connector type is same as the first main photo.

2. You also can buy the another end connector based your requirement. please search "CYFPV" at our store to buy the other connector.

3. we also have the FPC cable from connector to connector (20cm or 50cm),please search "CYFPV" at our store.

---------------------------------------------------------------------------------

Work for Multicopter Aerial Photography

Typical application: connect your video device with HDMI port to video device with standard HDMI input.

When the cable is too stiff, it may affect the gimbal performance especially for those light weight gimbals.

This cable is very soft ,specially oriented brushless gimbal application ,suit for cameras with HDMI port.

SKU: CN-018-FE

CYFPV HDMI Type A Female Connector Socket for FPV HDTV Multicopter Aerial Photography

Note:

1. The package only include one connector, the connector type is same as the first main photo.

2. You also can buy the another end connector based your requirement. please search "CYFPV" at our store to buy the other connector.

3. we also have the FPC cable from connector to connector (20cm or 50cm),please search "CYFPV" at our store.

---------------------------------------------------------------------------------

Work for Multicopter Aerial Photography

Typical application: connect your video device with HDMI port to video device with standard HDMI input.

When the cable is too stiff, it may affect the gimbal performance especially for those light weight gimbals.

This cable is very soft ,specially oriented brushless gimbal application ,suit for cameras with HDMI port.

SKU: CN-017-FE

CYFPV Mini HDMI Type C Female Connector Socket for FPV HDTV Multicopter Aerial Photography

Note:

1. The package only include one connector, the connector type is same as the first main photo.

2. You also can buy the another end connector based your requirement. please search "CYFPV" at our store to buy the other connector.

3. we also have the FPC cable from connector to connector (20cm or 50cm),please search "CYFPV" at our store.

---------------------------------------------------------------------------------

Work for Multicopter Aerial Photography

Typical application: connect your video device with HDMI port to video device with standard HDMI input.

When the cable is too stiff, it may affect the gimbal performance especially for those light weight gimbals.

This cable is very soft ,specially oriented brushless gimbal application ,suit for cameras with HDMI port.

Micro USB 3.0 10pin Female Socket SMT Type 5.2mm Height

Receptacle Board Mount SMT Type

for Samsung Toshiba USB Hard Disk

10pcs in the package.