PCI Express Gen 5.0 X16 to Dual 2X NVME M.2 SSD & 8X PCI-E 4.0 Raid Card VROC Raid0 Hyper Adapter

PCI Express Gen 5.0 X16 to Dual 2X NVME M.2 SSD & 8X PCI-E 4.0 Raid Card VROC Raid0 Hyper Adapter

1) The product does not support hardware raid, the product only supports the formation of Vroc soft raid under win10/win11 system, or the use of other third-party software to build raid.

2) Only supports motherboards with bifurcation detachable PCI-E channels.Control the operation of two disks based on the motherboard PCIE channel,The motherboard without PCIE signal split can only recognize one disk.NVME dual-disks design, Stable installation, Can run dual NVME disks at full speed at the same time.

3) Built-in multiple sets of high-power DC modules for sustainable and stable work.The innovative design can accommodate two NVMEs of the chassis, and can support simultaneous operation.

4) Low Profile design: The low profile type Allowing you to connect it to 1U PCI-E port, even if space around the port is limited.

5) VROC is an enterprise RAID solution that unleashes the performance of NVMe SSDs, enabled by a feature in Scalable processors called Volume Management Device (VMD), an integrated controller inside the CPU PCIe root complex. VROC enables these benefits without the complexity, cost, and power consumption of traditional hardware RAID host bus adapter (HBA) cards placed between the drives and the CPU.

6) Selected 4-layer high-density PCB substrate with gold-plated surface treatment ensures zero loss of PCIe 4.0/5.0 UHF signal (32GT/s) transmission and maintains 128GB/s bi-directional bandwidth performance perfectly.